If you have a gas golf cart that is not starting, sometimes all you need to do is jumpstart it with a car. However, this is an advanced technique and should only be attempted by those who are familiar with the workings of gas golf carts.
If you do not know how to jumpstart a golf cart, then you should seek assistance from a professional.
Source: Golfcartgo
Can You Jumpstart A Gas Golf Cart With A Car
In order to jumpstart a gas golf cart you will need to follow these steps: Turn off the fuel and remove the battery. Unscrew the top cover and remove the cables and starter motor.
Clean all parts thoroughly before reassembly.
Turn Off The Fuel
If you’re having trouble starting your gas golf cart, there’s a quick and easy fix. All you need is a car to jump-start the cart. Make sure the car is in Park before turning off the fuel.
Next, use the key to turn off the engine on the golf cart. After that, disconnect the battery cables from the golf cart. Finally, place one end of the cable under the front bumper and connect it to the other end of the cable attached to your car’s battery.
Once everything is connected, start your car and let it idle for two minutes while you wait for your golf cart to start up on its own. If this doesn’t work, then there may be something wrong with either your golf cart or your car battery.
In most cases, just turning off the fuel will solve the problem of not being able to start your golf cart.Always have a backup plan in case things don’t go as planned when trying to start your gas golf cart.
Remove The Battery
If your gas golf cart will not start, it may be helpful to check the battery first. Disconnecting and removing the battery can help you troubleshoot any electrical issues.
It’s also a good idea to clean the terminals and connections on the battery before re-attaching it. Remember to reconnect everything correctly and make sure all cables are connected properly.
Sometimes replacing the battery is all that’s needed to get your golf cart back up and running smoothly. Make sure you have the correct size battery for your golf cart before purchasing it, as some batteries are not compatible with certain models.
Source: Ezgolfcart
Be aware of where your Golf Cart is located when checking for loose wires or broken connectors; these areas can be difficult to reach without tools or help from someone else.
Finally, if your gas golf cart still won’t start after following these steps, bring it in for service at a nearby repair shop
Unscrew The Top Cover
It’s not always easy to jump-start a gas golf cart with a car, especially if you don’t have the right tools on hand. If your battery is weak or dead, using a wire jumper cable may not help you start the engine.
You can find an adapter that will fit your car and connect it to the golf cart battery terminals. Open the hood of your car and locate the red clamp that attaches the cable to your battery post. Detach the clamp from the post and insert it into one of the screw holes on top of the cover of your golf cart.
Screw the clamp onto the cover of your golf cart and tighten it with a wrench. Insert the end of the cable into the other screw hole on top of the cover of your golf cart, making sure that both ends are fully connected to each other.
Now step on the starter pedal in your car and hold down until you hear a click from inside your golf cart; release pedal when you do this.
Make sure that everything is connected correctly before trying to start your golf cart – including cables, clamps, and posts – by rechecking all connections once more before getting behind the wheel.
Remove The Cables And Starter Motor
Jumpstarting a gas golf cart can be a difficult process, but with the right tools it can be done quickly and easily. It is important to have the right tools before beginning, including an electrician’s crimping tool, screwdriver set, and car battery charger.
First disconnect the negative battery cable from the golf cart’s battery. Next remove the four screws that secure the starter motor coverplate to the engine block. Carefully pull off the starter motor coverplate, being sure to keep all of the screws in place.
Disconnect the cables from both sides of the flywheel by loosening each connector bolt with a screwdriver and removing them from their clips on either side of the flywheel housing.
Now you are ready to jumpstart your golf cart! Connect one end of your car battery charger to one connector on the cable harness, then connect the other end of your charger to an outlet on your vehicle.
Apply power to your car battery charger and wait until both green lights on the charger turn off (the red light will stay on). Replace the starter motor coverplate and screws, then reconnect all cables and test drive your golf cart.
Clean All Parts
Cleaning all parts of your gas golf cart can help to keep it running smoothly. When you start to notice signs that your golf cart is not operating at its best, it’s time to take care of all the small details.
Checking and cleaning oil levels, brakes, and spark plugs are a few of the tasks you should complete on a regular basis. If something breaks or stops working, don’t wait until it becomes a bigger problem. Fix it now! Putting things back together correctly will prevent future problems from arising.
It’s important to clean the exterior of your golf cart as well as inside and out. Wipe down surfaces with a damp cloth and then dry them off completely before re-applying any sealants or paint jobs. Don’t forget about storage—clean everything inside including the seats, steering wheel, and windshield wipers.
Get rid of any debris that has accumulated over time by vacuuming or sweeping it away with a broom/mop combo. Finally, remember to change the oil in your golf cart every months or miles whichever comes first.
How To Jumpstart A Gas Golf Cart
Jumpstarting a gas golf cart can be done with the help of a car. The process is relatively easy and requires only a few items. Make sure to have the right tools before beginning, including jumper cables and an engine block wrench.
If your golf cart has been sitting for a while, it may take more than just jumpingstart to get it running again. Refer to the owner’s manual for specific instructions on how to jumpstart the golf cart.
Golf carts are often equipped with kill switches, so be sure to turn them off if you don’t plan on using them again right away.
After starting the engine, verify that all the lights work properly by checking the headlight, taillight, brake light, and turn signals. Once everything is working as it should, make note of the battery voltage and take care of recharging when necessary.
What To Do If You Can’T Jumpstart The Cart
If you have tried to jumpstart your gas golf cart and it still won’t turn over, there are a few things you can do. First, make sure all of the cables are plugged in and tight.
Next, try turning the key in the ignition several times before giving up and calling a tow truck. If that doesn’t work, try disconnecting some of the wires near the battery. If none of those solutions work, it might be time to call a professional to help get your golf cart started.
Before reaching for that phone number, be sure to review your owner’s manual first to see if there is anything else you can do before calling for help. Most gas golf carts require little maintenance aside from checking fluid levels and replacing spark plugs every miles or so.
Don’t forget about safety when trying to start your golf cart always wear gloves and protective eyewear when working on it! Finally, don’t hesitate to ask other members at your club for assistance if neededmany of them may have had similar experiences with starting their carts in the past.
Conclusion
A car will not be able to start a gas golf cart.
Leave a Reply