Hitting the golf ball with your clubs into the net while damaging the beautiful lawn is not a viewable experience. Buying an artificial golf mat instead is just not worth it and can prove to be costly. Therefore, you can address this issue by creating a golf mat yourself. That too, in the cheapest way possible.
A homemade golf mat will quench your thirst for practice and allow you more room for getting into touch. Depending on your method, you can carry the self-made golf mat with you anywhere as well. In this article, we have devised some ways for you to make a durable golf mat yourself.
How to Make a Homemade Golf Mat?
In this section, we have arranged some systematic ways to make a golf mat effortlessly. We believe following these quick and short steps will lead you to your desired result convincingly.
Step 1: Preparation
To get started, assemble all the relevant items required for making your golf mat. The items include plywood sheet, hand saw, artificial turf, adhesive spray, a pair of sawhorses, carpenter’s pencil, and carpet padding. These items are readily available in related stores so there shouldn’t much trouble gathering them.
Step 2: Shape the Plywood
The next step comes as you have to shape the plywood. Prepare a sheet of plywood with a dimension of 4 by 8 feet. Place it on a pair of sawhorses and measure 3 feet along the length and mark it using a pencil. After marking a cutting line, mark another line that’ll represent the hand saw’s actual travel path.
Take necessary precautions such as wearing goggles and a pair of gloves. Align the hand saw with the cutting line and cut along the line. The result will be a 4 by 5 feet plywood which is the standard golf sheet size.
If you’re not confident enough the use hand saw yourself, you can always seek help from a lumberyard worker to cut the plywood sheet down to size for you. The size and shape may vary to fit your comfort. In general, if you’ve got enough space to stand on your sheet and hit the golf ball comfortably, then it’s all good.
Step 3: Cut Carpet Padding and Artificial Turf
Set the artificial turf under the plywood sheet and cut the grass. Leave an inch or two on all sides. You can cut the extra edges later. Similarly, cut the carpet padding as well. The purpose of doing so is that they fit the plywood sheet completely.
While doing so, make sure you don’t damage the artificial turf. You can execute the cutting operations by using a scissor.
Step 4: Apply Bonding Spray and Place the Padding
The next step is to use an adhesive or bonding spray on the plywood sheet. Spray thoroughly and especially on the edges. Place the carpet padding on top of the plywood sheet. Start by rubbing your hands at the middle and work outward. Make sure the carpet padding is properly in contact with the sheet and smooth out creases.
The point to note here is that you should use the bonding spray in a well-ventilated area. Add another layer of carpet padding if you intend to make a softer golf mat.
Step 5: Drill a Hole Through the Plywood and Padding
This time use a drill machine to drill a hole through the combination of plywood sheet and padding. The hole should be centered across one foot from the edge. While making holes, make sure you don’t damage any other part of the board.
Step 6: Add More Spray and Place the Artificial Turf
After the carpet paddings have been set, apply more adhesive spray on top of the padding. This time place the artificial turf on top it and smoothen it out to avoid creases.
Step 7: Cut Off the Edges
Turn the golf mat over and cut off the grass edges using the plywood sheet as the guide. Do not haste and cut cautiously along the line.
Step 8: Make a Tee Hole
The next step is to make a tee hole on the mat. Use a utility knife to cut a four-inch hole through the artificial turf right at the place of the board where you made a drill hole. You can use any four-inch circular object as a guide. After cutting, discard the piece of artificial turf.
The purpose of this particular step is to allow you to use rubber tees with your mat for practice. You will also be able to use the mat as a putting green.
Step 9: Insert the Tee into the Hole
Use the three holes on the base plate of the tee to secure it to the plywood and padding combination. For that purpose, you can make use of some brads.
Leave the mat for a day or two to tighten up and there you have your very own homemade golf mat.
If you cannot find plywood or unable to use a hand saw or a drill machine, you can make use of a rubber fatigue mat instead of a plywood sheet. You can easily cut them with scissors and utility knife and you’ll require no drilling. The other steps are identical to a plywood sheet operations.
One of the advantages of a rubber fatigue golf mat is that you can easily bend it and take it anywhere with you. This type of mats is easy to convert into a putting green as well. On the other hand, plywood mats are more durable and they give you a solid feel.
Making a golf mat on your own not only gives you a sense of satisfaction but also upgrades your game sense by a fair margin. While the processes of making a homemade golf mat may seem fairly easy to execute, they are only cleanly achieved when you follow the right instructions.
In short, to get better in any game, there’s no alternative but to practice. For golf, it’s all the more so. Therefore, having your very own golf mat will undoubtedly take your game level up severalfold and give you the vibe of an actual course.
Also read-What to Wear to a Golf Outing Woman?