Keep the ball in front, take the rangefinder to one eye, fix it onto the target, match the green line to the bottom of the flag and get the result.
Pre-Steps Before Using the Rangefinder
The steps needed before targeting the scope rangefinder are:
Make Sure the Tool
Most of the rangefinders available on market are for hunting. but the hunting rangefinder is different from the golf rangefinder. Make sure the rangefinder you are going to buy is for golfing. So, the first thing is, select the golf scope rangefinder that fits easily in your pocket and can measure a minimum of 600 yards.
Prepare the Device
If the scope rangefinder is powered by a battery, read the instructions and fix it. After installing, be sure that the tool is working properly.
Play a Trial
Try to know how the scope rangefinder works before playing the match. For this, stand away from a tee and adjust the tool. Turn the machine on, hold it to the eyes, start looking through lenses. If it is needed, make adjustments to the focus wheels to get the clearest pictures.
How to Use?
Basic steps needed to use a scope rangefinder are:
Step 1: Stand by keeping the golf ball in front of you and find the target (it may be the flagstick).
Step 2: When you feel that the rangefinder is ready to measure, lift the eyepiece, keep it to eye level.
Step 3: Now turn your scope rangefinder on, aim it onto the target. Hold the scope by keeping the target straight. There is a green line on the viewfinder. Match it to the flag bottom.
Step 4: Breathe normally and stay relaxed. So, you can stabilize the target. Hold the tool in one hand, rest the elbow on the chest. Wait a few seconds and get the yardage result.
Step 5 (Measuring in an Obstructed View): Your scope rangefinder may work dealing with such obstructions or not. To get a perfect view and measurement of the target, focus the rangefinder on it, align the crosshairs and line up the rangefinder. It may take a little bit of patience and time to use it for the first time.
Step 6: Choose your golf club according to the distance you found.
Note: It may be better if you target the rangefinder at the ground first, quickly press and start to measure the distance.
For the GPS Rangefinder
Using a GPS rangefinder is quite different. Watch the below steps needed for it.
Step 1: Load the golf course map to the rangefinder. You may find it on the internet.
Step 2: Turn the GPS rangefinder on and connect to the satellite feed. Thus, the GPS rangefinder will receive access to your location, slopes as well as flagsticks.
Step 3: Aim the target and watch the distance or slope readings.
Note: The GPS signal and internet connection control the GPS rangefinder’s ability. Always keep updating the maps.
If There Is a Slope?
The steps described above were for the flat golf tracks. But if there are golf holes that are not flat, then the solutions are given below.
Find a device with slope functions. Many of the rangefinders bear the option to measure distance with the slope consideration. Sope calculation is not permitted in competition play. Then you have to keep this function off by the toggle switch.
Step 1: Enable the slope setting (watch the instruction book). Stand in parallel to the target.
Step 2: Aim the tool at the ground first and then aim it to the target. The machine will calculate the slope in the middle of you and your target. It will also measure the return angle.
How to Read a Golf Rangefinder
Reading of the three types of golf rangefinders is given here.
Reading a Laser Rangefinder
It is just like reading a genuine rangefinder.
Step 1: After starting the tool, choose the mode or slope function.
Step 2: Make all the needed adjustments, set the device on your eyes, aim the target flag, and push the button.
Step 3: Now gently watch the reading surface. You will find the calibrations and the distance between the flag and you.
Reading the GPS Rangefinder
This process is quite easy. As the GPS one works with the loaded maps, it has all information about the flagstick, slopes, and the obstacles of a course.
Step 1: Load the course, get the latest data from the satellite.
Step 2: Now choose your target flag, hole, or slope. Then the device will show you the accurate distance at the display screen.
Note: By this process, the distance may not be so accurate.
The Optical Rangefinder
Reading the optical rangefinder needs only two steps!
Step 1: Look through the tool, keep the knob moving until you get a clear vision.
Step 2: After adjusting it perfectly, a golfer will find the distance. These types of rangefinders cannot give the accurate distance, they only just give approximations.
1. Protocol Golf Rangefinder
What to Like
Protocol Golf Rangefinder claims that it can make your club selections easier. It provides a range of 50 to 200 yards and a lightweight design(as it has a plastic body). While playing, you will surely fit this tool easily in g0lf-bag pockets.
A rangefinder, nylon loop, carrying case, and a lens cleaning cloth are included in the package of this Protocol Golf Rangefinder. Manufacturers are giving you a warranty of one year.
2. Bushnell 5*20 Golf Scope
If you are searching for a low-cost, small-scope rangefinder, Bushnell has come here with their Bushnell 5*20 Golf Scope. It can be an inexpensive alternative to any GPS rangefinder. This tool is also very simple and easy to use, just line up the flag base to the reticle bottom, then read the reticle numbers which are aligning with the flagstick top.
Its monocular design makes it possible to carry the tool in a pocket. The Bushnell 5*20 Golf Scope gives a 5X magnification, focus-free design to give the close-up view. The tool is ready to measure the distance of 50 to 200 yards from the flag.
- The device is made for 8-feet flagsticks only.
How will I aim my golf rangefinder?
Aim the rangefinder at the ground, quickly press the button that starts distance calculating. When it shows the reticle in its display, it is ready to operate. Now the golfer can aim at the target.
Should I use a golf rangefinder?
These are made for the golfers to gain accuracy in distance measuring and shot-making. So, it will surely improve your game by giving them information on how you should hit the ball.
What do we see in a golf rangefinder?
It shows the correct yardage measurement of your target, course slope maximum, and minimum range.
Q: Do I need a slope on my rangefinder?
Ans: Though you can’t use the slope function during tournaments, using the slope options in practice will help you on how to make shots on various displacements of the earth’s surface.
Eliminate all your confusion and get the perfect idea on how to make the best use of a golf scope rangefinder. Additionally, get the reviews of rangefinders to form well-known companies, know what to do if there is a slope, and how to get readings.